Teton Realty Blog

Teton Region Real Estate Market Stats, Articles & News

  • Home
  • Listings ‘N Stuff
    • Property Search
    • Search Account
  • The Blog
    • Buyers
    • Sellers
    • Local Info
    • Market Reports
    • Know Your Home
    • 2022 Teton County, ID Code
    • Pages & Categories
  • About/Contact Me
    • Contact Me
    • About Me
    • Testimonials
  • Log In/Subscribe
    • Account Set-Up/Log-In
    • Weekly Newsletter
  • Facebook
  • LinkedIn
  • YouTube

Will Heat Pumps Work in the Teton Valley Climate

April 18, 2018 By Tayson Rockefeller Leave a Comment

You’ll probably find a video in the coming weeks with respect to heat pumps in our climate, I’ve just installed one. One can assume that probably means that they do work in our climate, otherwise I wouldn’t have installed one. The real answer is, pretty much. With that said, read on for details.

The first thing to understand about heat pumps is how they work. In a traditional sense, heat is created by burning fuel (in the case of Teton Valley, propane, whereas natural gas is not available) or with the use of an electric heating element much the heating element in your oven, or the elements that glow bright red in your toaster. Heat pumps work much differently. Essentially, they absorb heat from the outside and transfer that heat inside your home through refrigerant. Refrigerant has all sorts of weird properties that allow it to boil and change from a liquid to a vapor at temperatures far different than something like water.

Not all heat pumps are created equal, there are different types. The most common types are air source and ground or water source heat pumps.

Ground source heat pumps are more traditionally referred to as geothermal systems.  There are different types of geothermal systems. The most common types are open-loop and closed-loop, we see closed loop systems more frequently in our area, but I have seen both. With a  closed loop  system, liquid is pumped through tubes in the ground which is naturally warm, even throughout the winter months. The heat that is absorbed is then extracted from the liquid as it returns to the heat pump, and the cold water is then pumped back into the ground to be reheated naturally. In the case of an open loop system, groundwater is used usually from a domestic well, the heat is extracted, and the water is then allowed to drain or in some cases is injected back into the ground.

Air source heat pumps are more traditionally referred to as condensers and evaporators, a good example is an air conditioning system. An air conditioner works by absorbing heat inside the home, then transferring it outside. In the winter the cycle reverses, and the heat is absorbed from the outside air and transferred inside. Believe it or not, there’s enough heat in the outdoor air even at very low temperatures. Obviously a major benefit of an air source system is that it can be reversed, and the home is then air-conditioned during the cooling months. The downside is that these systems begin to lose efficiency at about 0 degrees Fahrenheit, but can operate efficiently in Sub-Zero temperatures to a point. This is why at the preface of my article I said “pretty much.”

With respect to the air source systems, it never gets below 0 degrees in Teton Valley, so there’s nothing to worry about. Right? Sarcasm aside, there are solutions. The easiest solution is obviously a backup heat source that can be activated when the temperatures get too low for the system to operate efficiently. The other solution is to add an auxiliary form of heat to the system which can either be in electric coil that is activated at very low temperatures, or a gas furnace that activates at low temperatures. The latter is referred to a “dual fuel” system.

There are other types of air source heat pumps which are commonly referred to as “mini splits.” Mini splits are basically an air source heat pump, but rather than having the system tied to a traditional furnace, they usually have a smaller self contained blower connected to an outside condenser via refrigerant lines. Mini splits are very common in most parts of the world because of their efficient cooling and heating capabilities and the fact that they can easily be retrofitted to any residence or building with relative ease. The downside is that most mini split indoor units (often called heads) don’t have any way to add auxiliary forms of heat such as heating elements or gas-burning forms of backup heat. Regardless, I do anticipate seeing more of these types of installations with backup heat such as baseboard electric which can be used seldomly when the temperatures dip into the sub double digits.

As for my system, it’s ducted and ductless mini split system with backup heat strips and temperature lockouts, all of which is controlled from my smartphone. I’d be happy to fill you in, it’s pretty cool stuff.

Stucco and Teton Valley

October 13, 2017 By Tayson Rockefeller Leave a Comment

We don’t see a ton of stucco in this area, but have seen it installed in years past. It is also becoming a popular accent material. Also, it is a durable material that rarely needs refinished.
Stucco has, however, had it’s share of troubled times. In the 60’s and 70’s, a stucco system called the Exterior Insulation and Finish System, or EIFS, was introduced. EIFS can be a durable system, which as the name indicates, also offers an additional insualtion layer. Basically a foam board is installed followed by a netting, then stucco. In the late 80’s, lawsuits began to surface due to water intrusion. While little to no siding systems are impereable to moisture, the problem with EIFS then was that it did not allow moisture to escape which created mold and other problems.
Today, EIFS systems and manufacturers have drainage systems which can be installed to prevent problems if moisture becomes present. In addition, most manufactuers require that installers are trained and certified. Repair persons should also be certified by the manufacurer.
In addition to EIFS, traditional stucco is still installed today. Unlike EIFS which is a single layer of stucco (actually synthetic stucco) over the netting and foam board, traditional stucco is a 3 layer system consisting of aggregate, a binder, and water, much like concrete.
With all of the new construction we are seeing today, it is important that if installing stucco, and particularly EIFS, that it is done so by a certified installer. In addition, the certificate should be retained for future buyers as well as future repair or warranty work. It would also be a great idea to have your roofing, siding and decking contractors to have a preliminary meeting with the stucco installer. Any items that meet or cover stucco MUST be property flashed so that water is directed away from, or to proper areas so that the drainage systems mentioned above work properly. If the contractor is not local, you or your general contractor should also review potential problem areas for ice damming. Pay special attention to North facing roof valleys and discuss roof ventilation systems which help prevent ice damming, which is often a result of heat loss.

Can homeowners associations fine me for violations?

May 8, 2016 By Tayson Rockefeller Leave a Comment

No FeesHomeowners association (HOA) violations have been a Hot Topic lately. Whether it’s the HOA acting outside of their authority based on interpretation of the development bylaws or restrictions, or imposing unreasonable fines for violations.

In 2014, Idaho legislators reported numerous complaints of homeowners associations providing unreasonable notice or demands or even fines for non-compliance of the HOA guidelines. There were circumstances in which subcontractors were hired to remedy issues or violations, and even though the HOA contracted with the subcontractor, bills were sent directly to the property owners.

To combat these scenarios and to protect homeowners, the legislatures set requirements in place to require procedures for homeowners associations to follow when working with violations.

During my continuing education course on the topic I was able to obtain information from the Senate Bill, provided by the course instructor at the Idaho real estate school.

That bill number 1310 from the Senate states:

(2) No fine may be imposed for a violation of the covenants and restrictions pursuant to the rules or regulations of the homeowner’s association unless the authority to impose a fine is clearly set forth in the covenants and restrictions and:

(a) A majority vote by the board shall be required prior to imposing any fine on a member for a violation of any covenants and restrictions pursuant to the rules and regulations of the homeowner’s association.

(b) Written notice by personal service or certified mail of the meeting during which such vote is to be taken shall be made to the member at least thirty (30) days prior to the meeting.

(c) In the event the member begins resolving the violation prior to the meeting, no fine shall be imposed so long as the member continues to address the violation in good faith until fully resolved.

(d) No portion of any fine may be used to increase the remuneration of any board member or agent of the board.

This bill is relatively straightforward, my interpretation is simple. You cannot impose a fine as an HOA unless authority to do so is set forth in the Covenants. Then, a majority vote by the HOA board is required prior to imposing any fine. A written notice of the above vote must be delivered with 30 days notice to the homeowner. In the event that homeowner even begin resolving the violation, notifying can be imposed as long as the homeowner continues to address the problem until it is resolved.

  • « Previous Page
  • 1
  • …
  • 3
  • 4
  • 5

Recent Testimonials

  • Douglas V.
  • Chuck M.
  • Terry & Joy K.
Teton Valley Realty
Copyright Teton Realty Blog© 2025 - Tayson Rockefeller - [email protected] - 208-709-1333 - sitemap | Privacy Policy, Copyright & Terms of Use