Teton County, Idaho Archives - Page 23 of 28

Commercial real estate, not all Brokers are created equal

October 16, 2016 By Tayson Rockefeller Leave a Comment

Depending on where you are from, you’re probably used to seeing real estate agents that typically work with residential home buyers and lot sales. Then, you have the commercial real estate brokers who are described by many as a “whole ‘nother animal”. This is usually because commercial real estate agents don’t do much in terms of residential sales. In some cases such as Idaho Falls, the brokers network with one another as well as more regional (or brokers in other regions) commercial brokers, and the local client base. It was described to me as “a lot of going out to lunch” (networking) when I asked a local real estate professional about trying to find information in the local MLS, which oftentimes commercial agents don’t do. Anyway, they hold things close to their chest. Maybe that’s because they are protecting their client base and interest as a commercial broker, or maybe it’s simply because they don’t need to use the MLS because it’s not the way it works in that area.

Regardless of the reason, the training, lingo, and education is indeed entirely different. Things like allocation, highest and best use, different types of commercial leases, trade fixtures, and many more other items come into play, that don’t apply to residential real estate. In many cases agents that begin working with the commercial real estate applications are oftentimes considered to have changed careers entirely. If they decide to continue working with all forms of real estate, additional training and even Realtor designations come into play.

Now that we have a grasp on the differences between the two types of Brokers, and how they do business in our area, such as Teton Valley, Jackson and surrounding areas? In my experience, there are different types of agents here, but that usually applies more to agents who specialize in farm and ranch and Residential rather than residential and commercial. Typically, any agent that has an opportunity to work with a commercial project or Prospect does so regardless of their experience or training. It’s worked for many years here and particularly in Jackson. While there are many agents who do have specific commercial real estate training, many do not. To complicate things further, comes the property management aspect. Because our area borders both Idaho and Wyoming, we find that they are different state regulations for property management which is also involved with commercial real estate applications in most cases. Wyoming Agency Law requires licensure for property management practice. However, Idaho is one of the only States in the Nation that does not require licensure for property management practice. So, we do see some separation with property management firms in the Jackson area that do carry real estate licenses to practice commercial primarily because of the property management aspect. Then, you get to Teton Valley, ID where you have residential real estate brokers practicing commercial real estate, that don’t necessarily practice property management because there are independent companies handling these tasks in most cases.

We are not likely to see dedicated commercial firms come to our region because of the lack of available work. However, it is important to understand that there are many moving parts to commercial real estate applications and property management. It would be prudent for those interested in working with a local Realtor to understand that Realtor’s knowledge in the commercial real estate sector. We do find in some cases that out-of-area commercial real estate brokers are brought into our area. However, because it is customary here to work in conjunction with the MLS with regards to Commercial Real Estate, and the fact that these out-of-region or out-of-state Brokers do not have access to our local MLS, it is far less effective from a marketing standpoint. We also find that because these non-regional commercial brokers do not understand the local market, it complicates things further.

The National Association of Realtors does have special training and designations for commercial real estate, such as the CCIM designation.

Heat Systems and what you need to know for Teton Valley’s climate

September 20, 2016 By Tayson Rockefeller Leave a Comment

Whenever I am showing property or listing homes for sale, (particularly this time of year) this tends to be a “hot” topic. How is the home heated? How efficient is the system? Is it comfortable and reliable? All good questions, but 1 system can’t check all the boxes in most cases.

Efficiency:

Since there are different types of heating systems that can be used with different fuel sources, let’s focus on fuel types first. Since we do not have Natural Gas infrastructure in Teton Valley, we will focus on the most common types, Propane and Electricity. As I type this, propane is at an absurdly low price per gallon, roughly $1 per gallon. Electricity is measured in kilowatt hours, and is roughly 7 cents per kilowatt. It’s important to know that propane can fluctuate, and can even be volatile at times. Electricity will rise over time, but has historically been very predictable. Further, our region (mainly Idaho) operates mostly on hydroelectric power. In fact, Idaho produces roughly 60% of it’s power needs by means of hydroelectricity, more than any other state in the west at this time.

Electricity:
7 cents/kilowatt (Fall River Electric Estimate, 2016)
BTU’s produced by 1 kilowatt = 3,413

Propane:
$??/gallon
BTU’s produced by 1 gallon of Propane = 91,500

Let’s do the math:

Using the above information, we can determine 1 gallon of propane = about 27 kilowatts. That said, at the current 7 cents per kilowatt, 1 gallon of propane would need to be $1.89 per gallon to be comparable. Since most forms of electric heat are 100% efficient (or more) and propane is usually 90% efficient (or less) let’s reduce that $1.89 an additional 10% to $1.70/gallon. Moral of the story? If propane is is less than $1.70 per gallon, your dollar is probably travelling a little further. If propane is over $1.70 per gallon, your electric forms of heat make more sense.

Types of heat, comfort, pros & cons:

This is a big one, what is the most comfortable form of heating (or cooling)?

In-Floor
In-floor heat systems can be propane fired or electrically heated, so you can choose whatever makes the most sense on the efficiency front. It creates a nice warm floor, great for cold feet during Teton Valley’s winters. The downsides? In-floor systems are known for taking a full day to warm up, and don’t regulate temperatures easily. Also, without an alternative source, these systems don’t provide a cooling solution.

Wall Heaters
These little electric heaters have a self contained fan and an electric coil. They are cheap to install, and usually have a thermostat for each room, so rooms that are not being used can be turned down, or turned off completely. These systems have been concern for fire hazard, and tend to be noisy, especially when they are not regularly cleaned and maintained.

Baseboard Heaters
Similar to the wall heaters, though these units radiate heat rather than force, or blow heat over electric coils. They rely on convection to circulate the heat throughout a room, which is why you oftentimes see them below a window. Heat rises, cold air (through the least insulated area in a room – ie a window) falls, and thus convection is created.

Forced-Air (traditional furnace)
This form of heat is a centrally located blower (called an air handler) with coils heated electrically or with propane. The air blows over the hot coils, heats the air, and circulates the warm air throughout the rooms. The ducts attached to the air handler can have dampers that shut off the ducts to certain rooms, creating a zoned system. However, without zoning capabilities, forced air systems tend to send too much heat to certain rooms, and not enough to others. On the bright side, the do heat up, or cool down very quickly.

The above about sums it up for the types of systems we typically see in this area, though I did not mention geothermal, heat pumps, or mini-splits. These systems transfer heat, rather than creating it. They work in conjunction with a refrigerant, a condenser, and a compressor. Without going into detail, these systems can work by transferring heat from the outside in, or from the inside out, depending on the season and system demands. With today’s technology, heat pumps can have a hard time creating heat efficiently in the areas extreme cold. However, some mini-splits (an outdoor compressor and an indoor fan) are now operating efficiently down to approximately -15 degrees F. In addition to having a heating an cooling solution in one package, these systems can be very efficient, sometimes as much as 200% (estimated) efficient in ideal conditions. That means propane would need to be 85 cents (or less) per gallon to meet these efficiency standards.

Reliability:

Reliability can be a concern, particularly for those from areas prone to winter outages due to ice storms. That isn’t too common here, though the power will go out periodically – usually not for long. However, if it does, a small backup generator isn’t likely able to keep up with your home’s essentials such as the refrigerator, freezer, emergency lights, wifi (kidding) as well as an all electric heat system. However, a propane fired in-floor system, forced air, or wall mounted unit uses very little electricity. In most cases a reasonable generator won’t have any issue keeping up.

sources: National Hydro Power Association, hydro.org

Recent Testimonials